Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta

More Options

• Is this a proxy?
• Similar
• Submit Audit
• Compare

//SPDX-License-Identifier: MIT
pragma solidity 0.8.4;

import "./libraries/ErrorReporter.sol";
import "./ComptrollerStorage.sol";
/**
 * @title ComptrollerCore
 * @dev Storage for the comptroller is at this address, while execution is delegated to the `comptrollerImplementation`.
 * OTokens should reference this contract as their comptroller.
 */
contract Unitroller is UnitrollerAdminStorage, ComptrollerErrorReporter {

    /**
      * @notice Emitted when pendingComptrollerImplementation is changed
      */
    event NewPendingImplementation(address oldPendingImplementation, address newPendingImplementation);

    /**
      * @notice Emitted when pendingComptrollerImplementation is accepted, which means comptroller implementation is updated
      */
    event NewImplementation(address oldImplementation, address newImplementation);

    /**
      * @notice Emitted when pendingAdmin is changed
      */
    event NewPendingAdmin(address oldPendingAdmin, address newPendingAdmin);

    /**
      * @notice Emitted when pendingAdmin is accepted, which means admin is updated
      */
    event NewAdmin(address oldAdmin, address newAdmin);

    constructor() {
        // Set admin to caller
        admin = msg.sender;
    }

    /*** Admin Functions ***/
    function _setPendingImplementation(address newPendingImplementation) public returns (uint) {

        if (msg.sender != admin) {
            return fail(Error.UNAUTHORIZED, FailureInfo.SET_PENDING_IMPLEMENTATION_OWNER_CHECK);
        }

        address oldPendingImplementation = pendingComptrollerImplementation;

        pendingComptrollerImplementation = newPendingImplementation;

        emit NewPendingImplementation(oldPendingImplementation, pendingComptrollerImplementation);

        return uint(Error.NO_ERROR);
    }

    /**
    * @notice Accepts new implementation of comptroller. msg.sender must be pendingImplementation
    * @dev Admin function for new implementation to accept it's role as implementation
    * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
    */
    function _acceptImplementation() public returns (uint) {
        // Check caller is pendingImplementation and pendingImplementation ≠ address(0)
        if (msg.sender != pendingComptrollerImplementation || pendingComptrollerImplementation == address(0)) {
            return fail(Error.UNAUTHORIZED, FailureInfo.ACCEPT_PENDING_IMPLEMENTATION_ADDRESS_CHECK);
        }

        // Save current values for inclusion in log
        address oldImplementation = comptrollerImplementation;
        address oldPendingImplementation = pendingComptrollerImplementation;

        comptrollerImplementation = pendingComptrollerImplementation;

        pendingComptrollerImplementation = address(0);

        emit NewImplementation(oldImplementation, comptrollerImplementation);
        emit NewPendingImplementation(oldPendingImplementation, pendingComptrollerImplementation);

        return uint(Error.NO_ERROR);
    }


    /**
      * @notice Begins transfer of admin rights. The newPendingAdmin must call `_acceptAdmin` to finalize the transfer.
      * @dev Admin function to begin change of admin. The newPendingAdmin must call `_acceptAdmin` to finalize the transfer.
      * @param newPendingAdmin New pending admin.
      * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
      */
    function _setPendingAdmin(address newPendingAdmin) public returns (uint) {
        // Check caller = admin
        if (msg.sender != admin) {
            return fail(Error.UNAUTHORIZED, FailureInfo.SET_PENDING_ADMIN_OWNER_CHECK);
        }

        // Save current value, if any, for inclusion in log
        address oldPendingAdmin = pendingAdmin;

        // Store pendingAdmin with value newPendingAdmin
        pendingAdmin = newPendingAdmin;

        // Emit NewPendingAdmin(oldPendingAdmin, newPendingAdmin)
        emit NewPendingAdmin(oldPendingAdmin, newPendingAdmin);

        return uint(Error.NO_ERROR);
    }

    /**
      * @notice Accepts transfer of admin rights. msg.sender must be pendingAdmin
      * @dev Admin function for pending admin to accept role and update admin
      * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
      */
    function _acceptAdmin() public returns (uint) {
        // Check caller is pendingAdmin and pendingAdmin ≠ address(0)
        if (msg.sender != pendingAdmin || msg.sender == address(0)) {
            return fail(Error.UNAUTHORIZED, FailureInfo.ACCEPT_ADMIN_PENDING_ADMIN_CHECK);
        }

        // Save current values for inclusion in log
        address oldAdmin = admin;
        address oldPendingAdmin = pendingAdmin;

        // Store admin with value pendingAdmin
        admin = pendingAdmin;

        // Clear the pending value
        pendingAdmin = address(0);

        emit NewAdmin(oldAdmin, admin);
        emit NewPendingAdmin(oldPendingAdmin, pendingAdmin);

        return uint(Error.NO_ERROR);
    }

    function setAdmin(address _admin) public {
        require(msg.sender == admin, "Unauthorized");
        address oldAdmin = admin;
        pendingAdmin = _admin;
        emit NewAdmin(oldAdmin, admin);
    }

    /**
     * @dev Delegates execution to an implementation contract.
     * It returns to the external caller whatever the implementation returns
     * or forwards reverts.
     */
    fallback () payable external {
        // delegate all other functions to current implementation
        (bool success, ) = comptrollerImplementation.delegatecall(msg.data);

        assembly {
              let free_mem_ptr := mload(0x40)
              returndatacopy(free_mem_ptr, 0, returndatasize())

              switch success
              case 0 { revert(free_mem_ptr, returndatasize()) }
              default { return(free_mem_ptr, returndatasize()) }
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

//SPDX-License-Identifier: MIT
pragma solidity 0.8.4;

import "./otokens/interfaces/IOToken.sol";
import "./PriceOracle.sol";
import "./vote-escrow/interfaces/IBoostManager.sol";

import "./interfaces/IComptroller.sol";
import "./UnitrollerAdminStorage.sol";

abstract contract ComptrollerV1Storage is IComptroller, UnitrollerAdminStorage  {
    /**
     * @notice Oracle which gives the price of any given asset
     */
    PriceOracle public override oracle;

    /**
     * @notice Multiplier used to calculate the maximum repayAmount when liquidating a borrow
     */
    uint public closeFactorMantissa;

    /**
     * @notice Multiplier representing the discount on collateral that a liquidator receives
     */
    uint public liquidationIncentiveMantissa;

    /**
     * @notice Max number of assets a single account can participate in (borrow or use as collateral)
     */
    uint public maxAssets;

    /**
     * @notice Per-account mapping of "assets you are in", capped by maxAssets
     */
    mapping(address => IOToken[]) public accountAssets;

    /// @notice Per-market mapping of "accounts in this asset"
    mapping(address => mapping(address => bool)) public accountMembership;

}

abstract contract ComptrollerV2Storage is ComptrollerV1Storage {
    struct Market {
        /// @notice Whether or not this market is listed
        bool isListed;
        // markets marked with autoCollaterize are automatically set as collateral for the user at the first mint
        bool autoCollaterize;
        /**
         * @notice Multiplier representing the most one can borrow against their collateral in this market.
         *  For instance, 0.9 to allow borrowing 90% of collateral value.
         *  Must be between 0 and 1, and stored as a mantissa.
         */
        uint collateralFactorMantissa;
    }

    /**
     * @notice Official mapping of oTokens -> Market metadata
     * @dev Used e.g. to determine if a market is supported
     */
    mapping(address => Market) public markets;


    /**
     * @notice The Pause Guardian can pause certain actions as a safety mechanism.
     *  Actions which allow users to remove their own assets cannot be paused.
     *  Liquidation / seizing / transfer can only be paused globally, not by market.
     */
    address public pauseGuardian;
    bool public _mintGuardianPaused;
    bool public _borrowGuardianPaused;
    bool public transferGuardianPaused;
    bool public seizeGuardianPaused;
    
    struct PauseData {
        bool mint;
        bool borrow;
    }

    mapping(address => PauseData) public guardianPaused;
}

abstract contract ComptrollerV3Storage is ComptrollerV2Storage {
    struct MarketState {
        /// @notice The market's last updated tokenBorrowIndex or tokenSupplyIndex
        uint224 index;

        /// @notice The timestamp the index was last updated at
        uint32 timestamp;
    }

    /// @notice A list of all markets
    IOToken[] public allMarkets;

    /// @notice The rate at which the flywheel distributes VIX, per second
    uint public compRate;

    /// @notice The portion of compRate that each market currently receives
    mapping(address => uint) public rewardSpeeds;

    /// @notice The 0VIX market supply state for each market
    mapping(address => MarketState) public supplyState;

    /// @notice The 0VIX market borrow state for each market
    mapping(address => MarketState) public borrowState;

    /// @notice The 0VIX borrow index for each market for each supplier as of the last time they accrued VIX
    mapping(address => mapping(address => uint)) public rewardSupplierIndex;

    /// @notice The 0VIX borrow index for each market for each borrower as of the last time they accrued VIX
    mapping(address => mapping(address => uint)) public rewardBorrowerIndex;

    /// @notice The VIX accrued but not yet transferred to each user
    mapping(address => uint) public rewardAccrued;
}

abstract contract ComptrollerV4Storage is ComptrollerV3Storage {
    // @notice The borrowCapGuardian can set borrowCaps to any number for any market. Lowering the borrow cap could disable borrowing on the given market.
    address public borrowCapGuardian;

    // @notice Borrow caps enforced by borrowAllowed for each oToken address. Defaults to zero which corresponds to unlimited borrowing.
    mapping(address => uint) public borrowCaps;
}

abstract contract ComptrollerV5Storage is ComptrollerV4Storage {
    /// @notice The portion of VIX that each contributor receives per second
    mapping(address => uint) public rewardContributorSpeeds;

    /// @notice Last timestamp at which a contributor's VIX rewards have been allocated
    mapping(address => uint) public lastContributorTimestamp;
}

abstract contract ComptrollerV6Storage is ComptrollerV5Storage {
    /// @notice The rate at which VIX is distributed to the corresponding borrow market (per second)
    mapping(address => uint) public rewardBorrowSpeeds;

    /// @notice The rate at which VIX is distributed to the corresponding supply market (per second)
    mapping(address => uint) public rewardSupplySpeeds;
}

abstract contract ComptrollerV7Storage is ComptrollerV6Storage {
    /// @notice Accounting storage mapping account addresses to how much VIX they owe the protocol.
    mapping(address => uint) public rewardReceivable;

    IBoostManager public boostManager;
}

//SPDX-License-Identifier: MIT
pragma solidity 0.8.4;

/**
  * @title 0VIX's IInterestRateModel Interface
  * @author 0VIX
  */
interface IInterestRateModel {
    /// @notice Indicator that this is an InterestRateModel contract (for inspection)
    function isInterestRateModel() external view returns(bool);

    /**
      * @notice Calculates the current borrow interest rate per timestmp
      * @param cash The total amount of cash the market has
      * @param borrows The total amount of borrows the market has outstanding
      * @param reserves The total amount of reserves the market has
      * @return The borrow rate per timestmp (as a percentage, and scaled by 1e18)
      */
    function getBorrowRate(uint cash, uint borrows, uint reserves) external view returns (uint);

    /**
      * @notice Calculates the current supply interest rate per timestmp
      * @param cash The total amount of cash the market has
      * @param borrows The total amount of borrows the market has outstanding
      * @param reserves The total amount of reserves the market has
      * @param reserveFactorMantissa The current reserve factor the market has
      * @return The supply rate per timestmp (as a percentage, and scaled by 1e18)
      */
    function getSupplyRate(uint cash, uint borrows, uint reserves, uint reserveFactorMantissa) external view returns (uint);

}

//SPDX-License-Identifier: MIT
pragma solidity 0.8.4;

import "../otokens/interfaces/IOToken.sol";
import "../PriceOracle.sol";

interface IComptroller {
    /// @notice Indicator that this is a Comptroller contract (for inspection)
    function isComptroller() external view returns(bool);

    /*** Assets You Are In ***/

    function enterMarkets(address[] calldata oTokens) external returns (uint[] memory);
    function exitMarket(address oToken) external returns (uint);

    /*** Policy Hooks ***/

    function mintAllowed(address oToken, address minter, uint mintAmount) external returns (uint);
    function mintVerify(address oToken, address minter, uint mintAmount, uint mintTokens) external;

    function redeemAllowed(address oToken, address redeemer, uint redeemTokens) external returns (uint);
    function redeemVerify(address oToken, address redeemer, uint redeemAmount, uint redeemTokens) external;

    function borrowAllowed(address oToken, address borrower, uint borrowAmount) external returns (uint);
    function borrowVerify(address oToken, address borrower, uint borrowAmount) external;

    function repayBorrowAllowed(
        address oToken,
        address payer,
        address borrower,
        uint repayAmount) external returns (uint);

    function liquidateBorrowAllowed(
        address oTokenBorrowed,
        address oTokenCollateral,
        address liquidator,
        address borrower,
        uint repayAmount) external returns (uint);

    function seizeAllowed(
        address oTokenCollateral,
        address oTokenBorrowed,
        address liquidator,
        address borrower,
        uint seizeTokens) external returns (uint);
        
    function seizeVerify(
        address oTokenCollateral,
        address oTokenBorrowed,
        address liquidator,
        address borrower,
        uint seizeTokens) external;

    function transferAllowed(address oToken, address src, address dst, uint transferTokens) external returns (uint);
    function transferVerify(address oToken, address src, address dst, uint transferTokens) external;

    /*** Liquidity/Liquidation Calculations ***/

    function liquidateCalculateSeizeTokens(
        address oTokenBorrowed,
        address oTokenCollateral,
        uint repayAmount) external view returns (uint, uint);



    function isMarket(address market) external view returns(bool);
    function getBoostManager() external view returns(address);
    function getAllMarkets() external view returns(IOToken[] memory);
    function oracle() external view returns(PriceOracle);

    function updateAndDistributeSupplierRewardsForToken(
        address oToken,
        address account
    ) external;

    function updateAndDistributeBorrowerRewardsForToken(
        address oToken,
        address borrower
    ) external;

    function _setRewardSpeeds(
        address[] memory oTokens,
        uint256[] memory supplySpeeds,
        uint256[] memory borrowSpeeds
    ) external;
}

//SPDX-License-Identifier: MIT
pragma solidity 0.8.4;

contract ComptrollerErrorReporter {
    enum Error {
        NO_ERROR,
        UNAUTHORIZED,
        COMPTROLLER_MISMATCH,
        INSUFFICIENT_SHORTFALL,
        INSUFFICIENT_LIQUIDITY,
        INVALID_CLOSE_FACTOR,
        INVALID_COLLATERAL_FACTOR,
        INVALID_LIQUIDATION_INCENTIVE,
        MARKET_NOT_ENTERED, // no longer possible
        MARKET_NOT_LISTED,
        MARKET_ALREADY_LISTED,
        MATH_ERROR,
        NONZERO_BORROW_BALANCE,
        PRICE_ERROR,
        REJECTION,
        SNAPSHOT_ERROR,
        TOO_MANY_ASSETS,
        TOO_MUCH_REPAY
    }

    enum FailureInfo {
        ACCEPT_ADMIN_PENDING_ADMIN_CHECK,
        ACCEPT_PENDING_IMPLEMENTATION_ADDRESS_CHECK,
        EXIT_MARKET_BALANCE_OWED,
        EXIT_MARKET_REJECTION,
        SET_CLOSE_FACTOR_OWNER_CHECK,
        SET_CLOSE_FACTOR_VALIDATION,
        SET_COLLATERAL_FACTOR_OWNER_CHECK,
        SET_COLLATERAL_FACTOR_NO_EXISTS,
        SET_COLLATERAL_FACTOR_VALIDATION,
        SET_COLLATERAL_FACTOR_WITHOUT_PRICE,
        SET_IMPLEMENTATION_OWNER_CHECK,
        SET_LIQUIDATION_INCENTIVE_OWNER_CHECK,
        SET_LIQUIDATION_INCENTIVE_VALIDATION,
        SET_MAX_ASSETS_OWNER_CHECK,
        SET_PENDING_ADMIN_OWNER_CHECK,
        SET_PENDING_IMPLEMENTATION_OWNER_CHECK,
        SET_PRICE_ORACLE_OWNER_CHECK,
        SUPPORT_MARKET_EXISTS,
        SUPPORT_MARKET_OWNER_CHECK,
        SET_PAUSE_GUARDIAN_OWNER_CHECK
    }

    /**
      * @dev `error` corresponds to enum Error; `info` corresponds to enum FailureInfo, and `detail` is an arbitrary
      * contract-specific code that enables us to report opaque error codes from upgradeable contracts.
      **/
    event Failure(uint error, uint info, uint detail);

    /**
      * @dev use this when reporting a known error from the money market or a non-upgradeable collaborator
      */
    function fail(Error err, FailureInfo info) internal returns (uint) {
        emit Failure(uint(err), uint(info), 0);

        return uint(err);
    }

    /**
      * @dev use this when reporting an opaque error from an upgradeable collaborator contract
      */
    function failOpaque(Error err, FailureInfo info, uint opaqueError) internal returns (uint) {
        emit Failure(uint(err), uint(info), opaqueError);

        return uint(err);
    }
}

contract TokenErrorReporter {
    enum Error {
        NO_ERROR,
        UNAUTHORIZED,
        BAD_INPUT,
        COMPTROLLER_REJECTION,
        COMPTROLLER_CALCULATION_ERROR,
        INTEREST_RATE_MODEL_ERROR,
        INVALID_ACCOUNT_PAIR,
        INVALID_CLOSE_AMOUNT_REQUESTED,
        INVALID_COLLATERAL_FACTOR,
        MATH_ERROR,
        MARKET_NOT_FRESH,
        MARKET_NOT_LISTED,
        TOKEN_INSUFFICIENT_ALLOWANCE,
        TOKEN_INSUFFICIENT_BALANCE,
        TOKEN_INSUFFICIENT_CASH,
        TOKEN_TRANSFER_IN_FAILED,
        TOKEN_TRANSFER_OUT_FAILED
    }

    /*
     * Note: FailureInfo (but not Error) is kept in alphabetical order
     *       This is because FailureInfo grows significantly faster, and
     *       the order of Error has some meaning, while the order of FailureInfo
     *       is entirely arbitrary.
     */
    enum FailureInfo {
        ACCEPT_ADMIN_PENDING_ADMIN_CHECK,
        ACCRUE_INTEREST_ACCUMULATED_INTEREST_CALCULATION_FAILED,
        ACCRUE_INTEREST_BORROW_RATE_CALCULATION_FAILED,
        ACCRUE_INTEREST_NEW_BORROW_INDEX_CALCULATION_FAILED,
        ACCRUE_INTEREST_NEW_TOTAL_BORROWS_CALCULATION_FAILED,
        ACCRUE_INTEREST_NEW_TOTAL_RESERVES_CALCULATION_FAILED,
        ACCRUE_INTEREST_SIMPLE_INTEREST_FACTOR_CALCULATION_FAILED,
        BORROW_ACCUMULATED_BALANCE_CALCULATION_FAILED,
        BORROW_ACCRUE_INTEREST_FAILED,
        BORROW_CASH_NOT_AVAILABLE,
        BORROW_FRESHNESS_CHECK,
        BORROW_NEW_TOTAL_BALANCE_CALCULATION_FAILED,
        BORROW_NEW_ACCOUNT_BORROW_BALANCE_CALCULATION_FAILED,
        BORROW_MARKET_NOT_LISTED,
        BORROW_COMPTROLLER_REJECTION,
        LIQUIDATE_ACCRUE_BORROW_INTEREST_FAILED,
        LIQUIDATE_ACCRUE_COLLATERAL_INTEREST_FAILED,
        LIQUIDATE_COLLATERAL_FRESHNESS_CHECK,
        LIQUIDATE_COMPTROLLER_REJECTION,
        LIQUIDATE_COMPTROLLER_CALCULATE_AMOUNT_SEIZE_FAILED,
        LIQUIDATE_CLOSE_AMOUNT_IS_UINT_MAX,
        LIQUIDATE_CLOSE_AMOUNT_IS_ZERO,
        LIQUIDATE_FRESHNESS_CHECK,
        LIQUIDATE_LIQUIDATOR_IS_BORROWER,
        LIQUIDATE_REPAY_BORROW_FRESH_FAILED,
        LIQUIDATE_SEIZE_BALANCE_INCREMENT_FAILED,
        LIQUIDATE_SEIZE_BALANCE_DECREMENT_FAILED,
        LIQUIDATE_SEIZE_COMPTROLLER_REJECTION,
        LIQUIDATE_SEIZE_LIQUIDATOR_IS_BORROWER,
        LIQUIDATE_SEIZE_TOO_MUCH,
        MINT_ACCRUE_INTEREST_FAILED,
        MINT_COMPTROLLER_REJECTION,
        MINT_EXCHANGE_CALCULATION_FAILED,
        MINT_EXCHANGE_RATE_READ_FAILED,
        MINT_FRESHNESS_CHECK,
        MINT_NEW_ACCOUNT_BALANCE_CALCULATION_FAILED,
        MINT_NEW_TOTAL_SUPPLY_CALCULATION_FAILED,
        MINT_TRANSFER_IN_FAILED,
        MINT_TRANSFER_IN_NOT_POSSIBLE,
        REDEEM_ACCRUE_INTEREST_FAILED,
        REDEEM_COMPTROLLER_REJECTION,
        REDEEM_EXCHANGE_TOKENS_CALCULATION_FAILED,
        REDEEM_EXCHANGE_AMOUNT_CALCULATION_FAILED,
        REDEEM_EXCHANGE_RATE_READ_FAILED,
        REDEEM_FRESHNESS_CHECK,
        REDEEM_NEW_ACCOUNT_BALANCE_CALCULATION_FAILED,
        REDEEM_NEW_TOTAL_SUPPLY_CALCULATION_FAILED,
        REDEEM_TRANSFER_OUT_NOT_POSSIBLE,
        REDUCE_RESERVES_ACCRUE_INTEREST_FAILED,
        REDUCE_RESERVES_ADMIN_CHECK,
        REDUCE_RESERVES_CASH_NOT_AVAILABLE,
        REDUCE_RESERVES_FRESH_CHECK,
        REDUCE_RESERVES_VALIDATION,
        REPAY_BEHALF_ACCRUE_INTEREST_FAILED,
        REPAY_BORROW_ACCRUE_INTEREST_FAILED,
        REPAY_BORROW_ACCUMULATED_BALANCE_CALCULATION_FAILED,
        REPAY_BORROW_COMPTROLLER_REJECTION,
        REPAY_BORROW_FRESHNESS_CHECK,
        REPAY_BORROW_NEW_ACCOUNT_BORROW_BALANCE_CALCULATION_FAILED,
        REPAY_BORROW_NEW_TOTAL_BALANCE_CALCULATION_FAILED,
        REPAY_BORROW_TRANSFER_IN_NOT_POSSIBLE,
        SET_COLLATERAL_FACTOR_OWNER_CHECK,
        SET_COLLATERAL_FACTOR_VALIDATION,
        SET_COMPTROLLER_OWNER_CHECK,
        SET_INTEREST_RATE_MODEL_ACCRUE_INTEREST_FAILED,
        SET_INTEREST_RATE_MODEL_FRESH_CHECK,
        SET_INTEREST_RATE_MODEL_OWNER_CHECK,
        SET_MAX_ASSETS_OWNER_CHECK,
        SET_ORACLE_MARKET_NOT_LISTED,
        SET_PENDING_ADMIN_OWNER_CHECK,
        SET_RESERVE_FACTOR_ACCRUE_INTEREST_FAILED,
        SET_RESERVE_FACTOR_ADMIN_CHECK,
        SET_RESERVE_FACTOR_FRESH_CHECK,
        SET_RESERVE_FACTOR_BOUNDS_CHECK,
        TRANSFER_COMPTROLLER_REJECTION,
        TRANSFER_NOT_ALLOWED,
        TRANSFER_NOT_ENOUGH,
        TRANSFER_TOO_MUCH,
        ADD_RESERVES_ACCRUE_INTEREST_FAILED,
        ADD_RESERVES_FRESH_CHECK,
        ADD_RESERVES_TRANSFER_IN_NOT_POSSIBLE,
        SET_PROTOCOL_SEIZE_SHARE_ACCRUE_INTEREST_FAILED,
        SET_PROTOCOL_SEIZE_SHARE_OWNER_CHECK,
        SET_PROTOCOL_SEIZE_SHARE_FRESH_CHECK
    }

    /**
      * @dev `error` corresponds to enum Error; `info` corresponds to enum FailureInfo, and `detail` is an arbitrary
      * contract-specific code that enables us to report opaque error codes from upgradeable contracts.
      **/
    event Failure(uint error, uint info, uint detail);

    /**
      * @dev use this when reporting a known error from the money market or a non-upgradeable collaborator
      */
    function fail(Error err, FailureInfo info) internal returns (uint) {
        emit Failure(uint(err), uint(info), 0);

        return uint(err);
    }

    /**
      * @dev use this when reporting an opaque error from an upgradeable collaborator contract
      */
    function failOpaque(Error err, FailureInfo info, uint opaqueError) internal returns (uint) {
        emit Failure(uint(err), uint(info), opaqueError);

        return uint(err);
    }
}

//SPDX-License-Identifier: MIT
pragma solidity 0.8.4;

/**
 * @title ERC 20 Token Standard Interface
 *  https://eips.ethereum.org/EIPS/eip-20
 */
interface IEIP20 {
    function name() external view returns (string memory);
    function symbol() external view returns (string memory);
    function decimals() external view returns (uint8);

    /**
      * @notice Get the total number of tokens in circulation
      * @return The supply of tokens
      */
    function totalSupply() external view returns (uint256);

    /**
     * @notice Gets the balance of the specified address
     * @param owner The address from which the balance will be retrieved
     * @return balance The balance
     */
    function balanceOf(address owner) external view returns (uint256 balance);

    /**
      * @notice Transfer `amount` tokens from `msg.sender` to `dst`
      * @param dst The address of the destination account
      * @param amount The number of tokens to transfer
      * @return success Whether or not the transfer succeeded
      */
    function transfer(address dst, uint256 amount) external returns (bool success);

    /**
      * @notice Transfer `amount` tokens from `src` to `dst`
      * @param src The address of the source account
      * @param dst The address of the destination account
      * @param amount The number of tokens to transfer
      * @return success Whether or not the transfer succeeded
      */
    function transferFrom(address src, address dst, uint256 amount) external returns (bool success);

    /**
      * @notice Approve `spender` to transfer up to `amount` from `src`
      * @dev This will overwrite the approval amount for `spender`
      *  and is subject to issues noted [here](https://eips.ethereum.org/EIPS/eip-20#approve)
      * @param spender The address of the account which may transfer tokens
      * @param amount The number of tokens that are approved (-1 means infinite)
      * @return success Whether or not the approval succeeded
      */
    function approve(address spender, uint256 amount) external returns (bool success);

    /**
      * @notice Get the current allowance from `owner` for `spender`
      * @param owner The address of the account which owns the tokens to be spent
      * @param spender The address of the account which may transfer tokens
      * @return remaining The number of tokens allowed to be spent (-1 means infinite)
      */
    function allowance(address owner, address spender) external view returns (uint256 remaining);

    event Transfer(address indexed from, address indexed to, uint256 amount);
    event Approval(address indexed owner, address indexed spender, uint256 amount);
}

//SPDX-License-Identifier: MIT
pragma solidity 0.8.4;

/**
 * @title IEIP20NonStandard
 * @dev Version of ERC20 with no return values for `transfer` and `transferFrom`
 *  See https://medium.com/coinmonks/missing-return-value-bug-at-least-130-tokens-affected-d67bf08521ca
 */
interface IEIP20NonStandard {

    /**
     * @notice Get the total number of tokens in circulation
     * @return The supply of tokens
     */
    function totalSupply() external view returns (uint256);

    /**
     * @notice Gets the balance of the specified address
     * @param owner The address from which the balance will be retrieved
     * @return balance The balance
     */
    function balanceOf(address owner) external view returns (uint256 balance);

    ///
    /// !!!!!!!!!!!!!!
    /// !!! NOTICE !!! `transfer` does not return a value, in violation of the ERC-20 specification
    /// !!!!!!!!!!!!!!
    ///

    /**
      * @notice Transfer `amount` tokens from `msg.sender` to `dst`
      * @param dst The address of the destination account
      * @param amount The number of tokens to transfer
      */
    function transfer(address dst, uint256 amount) external;

    ///
    /// !!!!!!!!!!!!!!
    /// !!! NOTICE !!! `transferFrom` does not return a value, in violation of the ERC-20 specification
    /// !!!!!!!!!!!!!!
    ///

    /**
      * @notice Transfer `amount` tokens from `src` to `dst`
      * @param src The address of the source account
      * @param dst The address of the destination account
      * @param amount The number of tokens to transfer
      */
    function transferFrom(address src, address dst, uint256 amount) external;

    /**
      * @notice Approve `spender` to transfer up to `amount` from `src`
      * @dev This will overwrite the approval amount for `spender`
      *  and is subject to issues noted [here](https://eips.ethereum.org/EIPS/eip-20#approve)
      * @param spender The address of the account which may transfer tokens
      * @param amount The number of tokens that are approved
      * @return success Whether or not the approval succeeded
      */
    function approve(address spender, uint256 amount) external returns (bool success);

    /**
      * @notice Get the current allowance from `owner` for `spender`
      * @param owner The address of the account which owns the tokens to be spent
      * @param spender The address of the account which may transfer tokens
      * @return remaining The number of tokens allowed to be spent
      */
    function allowance(address owner, address spender) external view returns (uint256 remaining);

    event Transfer(address indexed from, address indexed to, uint256 amount);
    event Approval(address indexed owner, address indexed spender, uint256 amount);
}

//SPDX-License-Identifier: MIT
pragma solidity 0.8.4;

import "../../interfaces/IComptroller.sol";
import "../../interest-rate-models/interfaces/IInterestRateModel.sol";
import "./IEIP20NonStandard.sol";
import "./IEIP20.sol";

interface IOToken is IEIP20{
    /**
     * @notice Indicator that this is a OToken contract (for inspection)
     */
    function isOToken() external view returns(bool);


    /*** Market Events ***/

    /**
     * @notice Event emitted when interest is accrued
     */
    event AccrueInterest(uint cashPrior, uint interestAccumulated, uint borrowIndex, uint totalBorrows);

    /**
     * @notice Event emitted when tokens are minted
     */
    event Mint(address minter, uint mintAmount, uint mintTokens);

    /**
     * @notice Event emitted when tokens are redeemed
     */
    event Redeem(address redeemer, uint redeemAmount, uint redeemTokens);

    /**
     * @notice Event emitted when underlying is borrowed
     */
    event Borrow(address borrower, uint borrowAmount, uint accountBorrows, uint totalBorrows);

    /**
     * @notice Event emitted when a borrow is repaid
     */
    event RepayBorrow(address payer, address borrower, uint repayAmount, uint accountBorrows, uint totalBorrows);

    /**
     * @notice Event emitted when a borrow is liquidated
     */
    event LiquidateBorrow(address liquidator, address borrower, uint repayAmount, address oTokenCollateral, uint seizeTokens);


    /*** Admin Events ***/

    /**
     * @notice Event emitted when pendingAdmin is changed
     */
    event NewPendingAdmin(address oldPendingAdmin, address newPendingAdmin);

    /**
     * @notice Event emitted when pendingAdmin is accepted, which means admin is updated
     */
    event NewAdmin(address oldAdmin, address newAdmin);

    /**
     * @notice Event emitted when comptroller is changed
     */
    event NewComptroller(IComptroller oldComptroller, IComptroller newComptroller);

    /**
     * @notice Event emitted when interestRateModel is changed
     */
    event NewMarketInterestRateModel(IInterestRateModel oldInterestRateModel, IInterestRateModel newInterestRateModel);

    /**
     * @notice Event emitted when the reserve factor is changed
     */
    event NewReserveFactor(uint oldReserveFactorMantissa, uint newReserveFactorMantissa);

    /**
     * @notice Event emitted when the protocol seize share is changed
     */
    event NewProtocolSeizeShare(uint oldProtocolSeizeShareMantissa, uint newProtocolSeizeShareMantissa);

    /**
     * @notice Event emitted when the reserves are added
     */
    event ReservesAdded(address benefactor, uint addAmount, uint newTotalReserves);

    /**
     * @notice Event emitted when the reserves are reduced
     */
    event ReservesReduced(address admin, uint reduceAmount, uint newTotalReserves);

    function accrualBlockTimestamp() external returns(uint256);

    /*** User Interface ***/
    function balanceOfUnderlying(address owner) external returns (uint);
    function getAccountSnapshot(address account) external view returns (uint, uint, uint, uint);
    function borrowRatePerTimestamp() external view returns (uint);
    function supplyRatePerTimestamp() external view returns (uint);
    function totalBorrowsCurrent() external returns (uint);
    function borrowBalanceCurrent(address account) external returns (uint);
    function borrowBalanceStored(address account) external view returns (uint);
    function exchangeRateCurrent() external returns (uint);
    function exchangeRateStored() external view returns (uint);
    function getCash() external view returns (uint);
    function accrueInterest() external returns (uint);
    function seize(address liquidator, address borrower, uint seizeTokens) external returns (uint);

    function totalBorrows() external view returns(uint);
    function comptroller() external view returns(IComptroller);
    function borrowIndex() external view returns(uint);
    function reserveFactorMantissa() external view returns(uint);


    /*** Admin Functions ***/

    function _setPendingAdmin(address payable newPendingAdmin) external returns (uint);
    function _acceptAdmin() external returns (uint);
    function _setComptroller(IComptroller newComptroller) external returns (uint);
    function _setReserveFactor(uint newReserveFactorMantissa) external returns (uint);
    function _reduceReserves(uint reduceAmount) external returns (uint);
    function _setInterestRateModel(IInterestRateModel newInterestRateModel) external returns (uint);
    function _setProtocolSeizeShare(uint newProtocolSeizeShareMantissa) external returns (uint);
}

//SPDX-License-Identifier: MIT
pragma solidity 0.8.4;

import "./otokens/interfaces/IOToken.sol";

abstract contract PriceOracle {
    /// @notice Indicator that this is a PriceOracle contract (for inspection)
    bool public constant isPriceOracle = true;

    /**
      * @notice Get the underlying price of a oToken asset
      * @param oToken The oToken to get the underlying price of
      * @return The underlying asset price mantissa (scaled by 1e18).
      *  Zero means the price is unavailable.
      */
    function getUnderlyingPrice(IOToken oToken) external virtual view returns (uint);
}

//SPDX-License-Identifier: MIT
pragma solidity 0.8.4;

abstract contract UnitrollerAdminStorage {
    /**
    * @notice Administrator for this contract
    */
    address public admin;

    /**
    * @notice Pending administrator for this contract
    */
    address public pendingAdmin;

    /**
    * @notice Active brains of Unitroller
    */
    address public comptrollerImplementation;

    /**
    * @notice Pending brains of Unitroller
    */
    address public pendingComptrollerImplementation;
}

//SPDX-License-Identifier: MIT
pragma solidity 0.8.4;

import "@openzeppelin/contracts/token/ERC20/IERC20.sol";

interface IBoostManager {
    function updateBoostBasis(address user)
        external
        returns (bool);

    function updateBoostSupplyBalances(
        address market,
        address user,
        uint256 oldBalance,
        uint256 newBalance
    ) external;

    function updateBoostBorrowBalances(
        address market,
        address user,
        uint256 oldBalance,
        uint256 newBalance
    ) external;

    function boostedSupplyBalanceOf(address market, address user)
        external
        view
        returns (uint256);

    function boostedBorrowBalanceOf(address market, address user)
        external
        view
        returns (uint256);

    function boostedTotalSupply(address market) external view returns (uint256);

    function boostedTotalBorrows(address market)
        external
        view
        returns (uint256);

    function setAuthorized(address addr, bool flag) external;

    function setVeOVIX(IERC20 ve) external;

    function isAuthorized(address addr) external view returns (bool);
}

{
  "optimizer": {
    "enabled": true,
    "runs": 10
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"error","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"info","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"detail","type":"uint256"}],"name":"Failure","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"oldAdmin","type":"address"},{"indexed":false,"internalType":"address","name":"newAdmin","type":"address"}],"name":"NewAdmin","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"oldImplementation","type":"address"},{"indexed":false,"internalType":"address","name":"newImplementation","type":"address"}],"name":"NewImplementation","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"oldPendingAdmin","type":"address"},{"indexed":false,"internalType":"address","name":"newPendingAdmin","type":"address"}],"name":"NewPendingAdmin","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"oldPendingImplementation","type":"address"},{"indexed":false,"internalType":"address","name":"newPendingImplementation","type":"address"}],"name":"NewPendingImplementation","type":"event"},{"stateMutability":"payable","type":"fallback"},{"inputs":[],"name":"_acceptAdmin","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"_acceptImplementation","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newPendingAdmin","type":"address"}],"name":"_setPendingAdmin","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newPendingImplementation","type":"address"}],"name":"_setPendingImplementation","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"admin","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"comptrollerImplementation","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"pendingAdmin","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"pendingComptrollerImplementation","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_admin","type":"address"}],"name":"setAdmin","outputs":[],"stateMutability":"nonpayable","type":"function"}]

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